Cleaning Fiberglass Tub After Installation

Sleek Home - Home Improvement

Home Improvement Articles and Remodeling Ideas

 
  Get Home Improvement Estimates
 

Cleaning Fiberglass Tub After Installation
Home > Help > Articles and Tutorials : c > Cleaning Fiberglass Tub After Installation
Cleaning Fiberglass Tub After Installation

 Premium Listings



 Cleaning Fiberglass Tub After Installation Information

Remove any loose debris from surface. Run tub full of warm water and mild detergent as hand dishwashing liquid or laundry detergent; soak for 1/2 to 1 hour; drain and rub surface with sponge, rag, or non- abrasive applicator; rinse thoroughly.

If grease, oil, tar stains: Spray with home laundering spray pre-wash; rub lightly with sponge or non-abrasive applicator; rinse.

If ceramic adhesives or paints: Follow solvent methods above under "tough stains".

This article was written by Anne Field, Extension Specialist, Emeritus, with references from Wisconsin Extension bulletin Maintaining Your Home - Care of Bathtub Enclosures.



MSU 2003

 Sponsored Links

 
Home  |  Contact Us  |  Site Map  |  Privacy  |  

© 2003-2005 Sleek Home. All Rights Reserved.