Repairing Holes in Window Screens

Sleek Home - Home Improvement

Home Improvement Articles and Remodeling Ideas

 
  Get Home Improvement Estimates
 

Repairing Holes in Window Screens
Home > Help > Articles and Tutorials : r > Repairing Holes in Window Screens
Repairing Holes in Window Screens

 Premium Listings



 Repairing Holes in Window Screens Information


Repairing holes to keep out insects can be done in the following steps:

METHOD 1 Step

1. Cut a patch of screen which will cover the hole at least 1" on all sides.

Step

2. Unravel a long piece of screen wire or several pieces and lace it through the patch and screen.(Vis. 1)

METHOD 2 Step

1. Cut a patch large enough to cover the hole with about 1-1/2" around all sides and unravel all sides of the patch about 1/2". (Vis. 2)

Step

2. Bend the ends of the wire 90 degrees to the patch and push them through the screen covering the hole. Bend over the wires projecting through on the back side to hold the patch. (Vis. 3)

This article was written by Anne Field, Extension Specialist, Emeritus, with references from Michigan Extension bulletin Repairing and Replacing Screens.

Repairing Holes in Window Screens Pictures

Visual title - Visual size Visual title - Visual size
Repairing Holes -Method 1 - 12K Repairing Holes -Method 2 Part 1 - 10K
Repairing Holes -Method 2 Part 2 - 13K Repairing Holes -Method 1 - 12K


MSU 2003

 Sponsored Links

 
Home  |  Contact Us  |  Site Map  |  Privacy  |  

© 2003-2005 Sleek Home. All Rights Reserved.