login  |  register

Cleaning Fiberglass Tub After Installation

Home > Help > Articles and Tutorials : c > Cleaning Fiberglass Tub After Installation


Premium Listings

Remove any loose debris from surface. Run tub full of warm water and mild detergent as hand dishwashing liquid or laundry detergent; soak for 1/2 to 1 hour; drain and rub surface with sponge, rag, or non- abrasive applicator; rinse thoroughly.

If grease, oil, tar stains: Spray with home laundering spray pre-wash; rub lightly with sponge or non-abrasive applicator; rinse.

If ceramic adhesives or paints: Follow solvent methods above under "tough stains".

This article was written by Anne Field, Extension Specialist, Emeritus, with references from Wisconsin Extension bulletin Maintaining Your Home - Care of Bathtub Enclosures.



MSU 2003