Whatever method you use, first test the cleaning/removal material in an inconspicuous part of the surface the label is stuck on the be sure it will not damage that surface.

Labels on glass, mirrors, and metals other than aluminum:

1. Fold a paper towel or cloth to make a thick pad, as large as the label.

2. Dampen pad with household ammonia; lay pad over label.(Use masking tape to hold pad onto a vertical surface.)

3. Wait 1/2 to 2 hours. Redampen the pad if it tends to dry out.

4. Label will slide off.(NEVER USE AMMONIA ON PLASTIC OR ALUMINUM.)

This article was written by Anne Field, Extension Specialist, Emeritus, with reference from Mary Ellen Delsipee, and Isabel Jones, previous Extension specialists.



MSU 2003